How To Register A Highway Mailbox

Mailbox Installation

How to Set Up & Mount a Mailbox

Follow U.S. Post^® guidelines for installing and placing a new mailbox at your dwelling. Go tips on the best materials to use to prepare a curbside mailbox and how to keep it in good status. Make sure that your mail carrier always has a clear path to your mailbox whether it'due south past the street or mounted on your business firm.

A mailbox with the Postmaster General's (PMG) seal of approving meets USPS size and construction standards. If you build your own mailbox or buy a custom-made one, it must meet the PMG standards. Testify your local postmaster your mailbox plans or your custom-made box for approving.

To get drawings and measurements for building your ain mailbox, write to Usa Postal Service Engineering.

Want to buy a mailbox big enough for packages? See Side by side Generation Mailboxes.

Hither are some helpful guidelines to follow when placing your mailbox:

• Position your mailbox 41″ to 45″ from the road surface to the bottom of the mailbox or point of mail entry.
• Place your mailbox 6″ to 8″ back from the curb. If you practice not accept a raised adjourn, contact your local postmaster for guidance.
• Put your house or apartment number on the mailbox.
• If your mailbox is on a different street from your house or flat, put your total street address on the box.

The best mailbox supports are stable only bend or fall abroad if a car hits them. The Federal Highway Administration recommends:

• A four″ x four″ wooden support or a 2″-diameter standard steel or aluminum pipe.
• Avert unyielding and potentially unsafe supports, like heavy metallic pipes, physical posts, and farm equipment (e.g., milk cans filled with concrete).
• Bury your mail no more than 24″ deep.

Some homes and apartments have a slot in the door for receiving mail instead of a mailbox. The standards for an approved door slot are:

• The opening must exist at least 1 1/2″ x 7″.
• The bottom of the slot must be at to the lowest degree 30″ above floor.
• Horizontal slots must have a flap hinged at the tiptop.
• Vertical slots must exist hinged on the opposite side from the door'south hinges.

For greater privacy, you lot tin can also install a mail slot hood on the inside of your door to prevent someone from seeing into your dwelling house. The standards for door slot hoods are:

• The hood should not projection more than than ii i/16″ across the within of the door.
• On a horizontal slot, the hood should not extend below the lesser of the outside plate.
• On a vertical slot, the hood should not extend beyond the side of the outside plate on same side as the door'south hinges.

• To supersede your curbside mailbox with a wall-mounted mailbox, you must go your local postmaster's permission.
• Choose from a diversity of mailbox sizes and styles; mounted mailboxes are not required to have a PMG seal of approving.
• Get a wall mailbox that tin can concord a normal day's mail book, including alphabetic character-sized envelopes, postcards, and catalogs.*
• Place the mailbox virtually the main entrance so your mail carrier can easily see it.

*Note: Wall-mounted mailboxes may but be used for items with stamp. Newspapers may not exist placed in the mailbox.

Mailboxes have a beating from the weather, so nosotros recommend an annual mailbox checkup to avoid damage to your mail or difficulty identifying your address.

• Tighten loose hinges on the door
• Have care of rusty or loose parts
• Supersede missing or faded house numbers
• Keep the path to your mailbox clear

Source: https://www.usps.com/manage/mailboxes.htm

Posted by: hilldiespithe.blogspot.com

Share this post